Press any key to clear the initial copyright screens until you reach the . Step 3: Configure Communications From the Main Menu, press F9 (Setup). Press F3 (PC Configuration).
Press F10 to exit back to the previous menu, then select (F5). motorola gp300 programming
Enter your desired Receive (Rx) and Transmit (Tx) frequencies. Ensure they fall within the specific hardware band split of your radio model (VHF 136-174 MHz or UHF 403-470 MHz / 438-470 MHz). Press any key to clear the initial copyright
: Since the cable often occupies the battery slot, you need a 7.5V–9V DC power supply or battery connected to the cable's leads. Press F10 to exit back to the previous
You must fill every space in the field (use trailing zeros). For example, to type 144.125 , you would hold shift and type !%%.!@% .
Before starting, connect the PC, RIB, programming pad, and radio. Ensure the radio is attached to a stable power supply (7.5V DC) via the adapter pad. Step 1: Powering On the System Turn on the PC and boot completely into MS-DOS. Turn on the RIB power switch.