日本語
The preloader is the initial boot code stored in a device's read-only memory (ROM) or electronic multi-media card (eMMC). It initializes hardware components, sets up RAM, and establishes a secure connection with flashing software. When this partition is corrupted or overwritten with the wrong firmware, the device enters a "hard bricked" state.
Connect the phone to the PC via USB while holding the buttons.
On the motherboard, there are two tiny gold dots labeled KCOLO0 or KCOLO1 . Shorting these to ground forces the CPU to power on in (100% hardware level).
Here is some text regarding the MTK Preloader Repair Tool:
How to fix MTK or SPD bricked after interrupting flash or backup
The Preloader is the lowest level of firmware on every MediaTek (MTK) chipset. Think of it as the BIOS on a computer. When this is corrupted, the device becomes an electronic brick. For years, repairing this required complex JTAG or ISP soldering. However, thanks to , technicians and advanced users can now resurrect these devices using just a USB cable and specialized software.
This article explores the latest software, hardware, and techniques used to repair the MTK preloader, focusing on the newest generation of tools available today.
