If your VPN clients need to communicate with devices sitting on your physical local network (LAN), you must enable Proxy-ARP on your local bridge interface. Without this, LAN devices won't know how to route return traffic back to the VPN clients. Navigate to > Interface tab.
/ip firewall filter add chain=input protocol=udp dst-port=500 action=accept comment="Allow IPsec IKE" add chain=input protocol=udp dst-port=4500 action=accept comment="Allow IPsec NAT-T" add chain=input protocol=udp dst-port=1701 action=accept comment="Allow L2TP" Use code with caution. 7. Step 6: Enable Proxy-ARP (Crucial Network Step)
Setting up an L2TP (Layer 2 Tunneling Protocol) server on MikroTik remains one of the most reliable ways to provide secure remote access to a local network. When combined with IPsec, it offers a robust balance of security and compatibility across Windows, macOS, Android, and iOS.
VPN clients need to receive an IP address automatically when they connect. You must define a dedicated range of IP addresses that does not conflict with your existing local network (LAN) DHCP pool. Open and navigate to IP > Pool . Click the + (Add) button. Set the Name to vpn-pool .
Since you haven't provided a specific article or video link to review, I have conducted a comprehensive review of the for setting up an MikroTik L2TP Server (specifically focusing on L2TP/IPsec for security). mikrotik l2tp server setup full
You must set aside a range of private IP addresses for your remote clients. Address Range 192.168.10.10-192.168.10.50 (or any range not in use by your local LAN). 2. Create a PPP Profile
Enter the username and password created in Step 4, then click and click Connect .
: Enter an IP for the router gateway inside the VPN network (e.g., 192.168.89.1 ). Remote Address : Select vpn-pool from the dropdown list. On the Protocols tab: Set Use Encryption to yes or required . On the Limits tab (Optional):
Setting up a provides a secure, encrypted tunnel for remote access, typically fortified with IPsec for industrial-grade data protection. This guide provides a full, step-by-step walkthrough to configure your MikroTik router as a VPN hub. Prerequisites A public IP address on your MikroTik WAN interface. Firewall access to UDP ports 500, 1701, and 4500 . Step 1: Create an IP Pool If your VPN clients need to communicate with
Troubleshooting issues for users behind home routers
First, we need to define a range of IP addresses that will be assigned to remote clients when they connect. Go to > Pool . Click + to add a new pool. Name: vpn-pool
IPsec Secret: Enter a strong pre-shared key (e.g., MySecretVPN123! ). Click and OK . Step 4: Create User Accounts (Secrets) Create credentials for users to connect to the VPN. Go to PPP > Secrets . Click + to add a new secret. Name: remote-user Password: UserPassword123 Service: l2tp Profile: l2tp-profile Click Apply and OK . Step 5: Configure Firewall Rules (Security)
A public IP address (Static is preferred; if you have a dynamic IP, use MikroTik's IP > Cloud DDNS). WinBox access to the router. Step 1: Create an IP Pool for VPN Clients When combined with IPsec, it offers a robust
To configure L2TP authentication, navigate to and click on the Authentication tab. Click the + button to create a new authentication configuration.
I can provide the specific if you prefer CLI over Winbox! Share public link
Настройка L2TP сервера в MikroTik - курсы mikrotik training
If you need to route or just local LAN traffic through the VPN
