Long-press the button to save and return to the main operational interface. If you need help setting up your device, tell me: What power source are you using for the input ? What specific load or battery type do you want to power?
Are you setting this up for , LED driving , or as a general bench power supply ?
: Shuts down the module if the output voltage exceeds the specified limit (Configurable range: 0.6V to 37V).
Related search suggestions provided.
This manual aggregates information from multiple sources, including official documentation, retailer specifications, and community-shared calibration procedures, to help you understand, operate, and maintain your ZK-5KX module effectively.
Turn the rotary encoder left or right to increase or decrease the flashing value.
Long press and then short press SW until "CAL" appears (e.g., "CAL + IN + V" for input voltage). zk5kx manual
If the onboard readings vary slightly from a high-precision bench multimeter, you can calibrate the voltage and current measurements manually: zk-5kx_voltage-converter.pdf - eleneasy.com
Press the to switch specifically to the constant current (CC) value setting.
This comprehensive manual covers technical specifications, button layouts, detailed programming instructions, calibration routines, and protection thresholds. Technical Specifications Long-press the button to save and return to
: Never short the input and output connections, as this can permanently damage the constant current functionality. Helpful Resources
Short-press the U/I button a second time while the interface is active. The target current limit digits will flash. Adjust the values using the encoder.
By default, the screen separates statistics between the upper line and the lower line. Use the button to toggle data: Are you setting this up for , LED