Dt6507 Led Mirror Clock Instructions !full! [FREE]

A short press of the ALARM button toggles it on/off (look for the "AL" or alarm icon). 3. Display & Brightness

An icon (or a dot) will appear on the display, indicating the alarm is ON.

Press and hold the button for 3 seconds. The hour digits will flash. Press UP or DOWN to select your desired wake-up hour. Press ALARM once. The minute digits will flash. Press UP or DOWN to select your desired wake-up minutes. Press ALARM once to save. 2. Set the Snooze Duration dt6507 led mirror clock instructions

Press the ALARM (or MODE to navigate) button, then hold down ALARM until the hour flashes.

The digits will flash. Use UP/DOWN to adjust, then press MODE to finish. 2. Setting the Alarm Short press ALARM to see the current alarm time. A short press of the ALARM button toggles

If you have questions about the for your home, I can share some tips. INSTRUCTION MANUAL

To program your clock, ensure it is plugged in and the screen is active. How to Set the Time Press and hold the button for 3 seconds

The DT6507 is a tabletop alarm clock that uses an LED display on a sleek mirrored surface. It presents not just the time, but also a calendar and a built-in thermometer. The clock is known for its unique "mirror" effect, which makes the digital readout appear to float on a reflective surface when the display is active.

Note: This guide covers the standard DT6507 model. Button placement may vary slightly by manufacturing batch.

: Press the ALARM button again. The icon will disappear.

: Primarily for memory backup. Note that when on battery power, the display will automatically turn off after 16 seconds to save energy; press SNZ/LIGHT or make a sound (if sound-activated) to wake it up.