Proteus 8 Link | Ir2110 Library For

Don't forget to add a capacitor (typically 1uF to 10uF) between the VB and VS pins. Without this, the High Side will not switch.

| Pin | Name | Description | | --- | --- | --- | | 1 | VDD | Logic supply (e.g., +15 V) | | 2 | HIN | High‑side logic input (PWM) | | 3 | SD | Shutdown – usually tied to GND | | 4 | LIN | Low‑side logic input (PWM) | | 5 | VSS | Logic ground | | 6 | VB | High‑side floating supply (bootstrapped voltage) | | 7 | HO | High‑side gate output (to top MOSFET) | | 8 | VS | High‑side floating return (source of top MOSFET) | | 9 | VC | Low‑side supply – connect to VDD | | 10 | LO | Low‑side gate output (to bottom MOSFET) | | 11 | COM | Low‑side return (power ground) |

However, I need to be upfront with you:

Do you require a schematic for a or a Half-Bridge configuration?

Labcenter does not provide it by default. You must download third-party libraries or create your own. ir2110 library for proteus 8 link

You can download the verified IR2110 library files from the following community repositories:

For high/low-side gate drive simulation: Don't forget to add a capacitor (typically 1uF

If you had Proteus open during this process, close the software completely. Restart Proteus 8 to allow the software to scan the directory and index the newly added IR2110 component. 🔍 Testing the IR2110 Component in schematic capture

The IR2110 is a popular high-voltage, high-speed power MOSFET and IGBT driver with independent high-side and low-side referenced output channels. Designing circuits with this IC requires careful attention to bootstrap capacitance and switching times. Labcenter does not provide it by default