Digi Sm-500 Scale User Manual Guide

Getting started involves turning on the device, ensuring it is level, and performing a basic zero check.

Navigate to within the specification settings to choose your primary label format. Standard pre-programmed formats range from F1 to F32 .

Press the green release lever to open the thermal print head mechanism.

Routine maintenance keeps your scale accurate and compliant with local weights and measures regulations. Cleaning Instructions digi sm-500 scale user manual

Note: Calibration steps vary slightly by revision. If “CAL” does not appear, consult the printed manual for your specific firmware version.

The DIGI SM-500 series scales are robust, high-performance instruments designed for demanding retail and industrial environments. Often found in supermarkets and delis, these scales are more than simple weighing devices. They are full-scale computing and printing systems designed to speed up transactions and integrate seamlessly into a point-of-sale (POS) network.

Set the : Press 0 for weighable items or 1 for non-weighable/piece-count items, then press Print/Enter . Getting started involves turning on the device, ensuring

: Detailed hardware specs, including printing speeds (up to 150mm/s), memory capacity (2MB standard, upgradeable to 10MB), and interface options like Ethernet and RS-232C. Initial Setup

Place the commodity onto the center of the stainless steel weighing platter.

Regular calibration ensures the scale remains accurate for trade. The procedure below is derived from the DIGI SM-500 MK4 service manual. Press the green release lever to open the

Clean the rubber roller and gap sensor with isopropyl alcohol. Out of labels or sensor misalignment.

I can provide the exact step-by-step programming codes for your setup. Share public link

Alkaline batteries are recommended for best stability. Rechargeable NiMH batteries (1.2V each) can cause low battery warnings earlier.