Finether Dehumidifier Operating | Instructions

. Slide it out, vacuum away dust, or wash it with warm, soapy water. Let it dry completely before reinstalling.

Plug the unit into a grounded wall outlet. Press the ON/OFF button. The display will light up, showing the current room humidity.

Allow the filter to air-dry completely in a shaded area before reinstalling it. Never operate the machine with a wet or missing filter. Cleaning the Water Tank (Every Month) Stored water can breed slime, mold, and bacteria over time. Remove the water tank entirely.

Sets a delay-start or auto-shutoff time ranging from 1 to 24 hours. Finether Dehumidifier Operating Instructions

Position the dehumidifier on a flat, level surface. Leave at least 20–30 cm (8–12 inches) of open space around the air intakes and outlets.

: Close all windows and doors in the room for maximum efficiency. On the very first use, it is recommended to run the unit continuously for 2. Control Panel & Basic Operations

: Wipe the casing with a soft, damp cloth. Avoid using harsh chemicals or abrasive pads. Plug the unit into a grounded wall outlet

By following these operating instructions, you can ensure safe and effective operation of your Finether Dehumidifier. Regular maintenance and cleaning will help extend the lifespan of your device. If you have any questions or concerns, please do not hesitate to contact Finether customer support.

Leave at least 30–50 cm (12–20 inches) of open space around all sides of the dehumidifier. Do not block the air intake grills or the dry air outlet.

Attach a compatible PVC drainage hose (usually 10mm internal diameter). Allow the filter to air-dry completely in a

Regular maintenance prevents musty odors, stops mold growth inside the machine, and maintains efficient airflow. Cleaning the Air Filter (Every 2 Weeks)

Place the unit on a flat floor with at least 20 cm (about 8 inches) of space around all sides for proper airflow.

Press the Speed button to toggle between High (fast drying) and Low (quiet operation). 3. Understanding Control Panel Modes