Connect the Wastewater port on the unit to the quick-connect fitting on the drain saddle.
Install the unit in a dry, ventilated area, away from direct sunlight, pests (ants/insects), and heating devices.
This article serves as a general overview. Always refer to the specific paper manual included in your box for model-specific diagrams and safety warnings.
Turn on the cold water supply. Look at every fitting. Wait 2 minutes. galaxy aqua premier installation manual
If you need to contact support, make sure you have the model number ready.
: 100kPa (1.0 bar / 15 psi) at a flow rate of 8 litres per minute (9 litres/min for 9.5kW units).
Allow the storage tank to fill completely (this takes roughly 2 to 3 hours). Connect the Wastewater port on the unit to
Minimum running pressure of 1.0 bar (14.5 psi) is required.
The manual begins with mandatory safety warnings. Key points include:
Let the storage tank fill completely, then empty it. This may take 1-2 hours depending on water pressure. 📋 Maintenance Checklist To keep your Galaxy Aqua Premier working efficiently: Always refer to the specific paper manual included
Installing a new water purification system can feel overwhelming. However, the Galaxy Aqua Premier is designed for straightforward setup. This comprehensive guide breaks down the entire installation process into clear, manageable steps to ensure your system operates at peak performance. 1. Pre-Installation Checklist
Before opening any valves, verify you have all necessary components and tools. Preparing your workspace beforehand prevents installation delays. Box Contents Main Galaxy Aqua Premier filtration unit Pre-filter cartridge and housing Designer chrome faucet with installation hardware Food-grade connecting tubing (colored for easy routing) Feed water adapter valve (T-valve) Drain saddle valve Storage tank (for Reverse Osmosis models) Housing wrench and Teflon tape Required Tools Variable speed drill 1/4-inch and 1/2-inch drill bits (for sink and drain) Adjustable wrench and Phillips screwdriver Utility knife or tube cutter Towel and bucket (to catch minor spills) 2. Component Placement Strategy
If you can tell me the on your unit, I can help you find the exact specifications and filter replacement schedule for your machine. I can also help you with steps for disinfecting the tank if you are noticing a change in taste. Installation and User Guide