+---------------+ | TECCOR | | A68064 | +---------------+ | | | | <-- Exposed Metal Tab (Connected to Pin 2 / Load Side) | | | 1 2 3 | | | G D S (Control / Main Terminals)
): 2 Watts (base rating without external thermal management) -40°C to +105°C Pin Configuration and Package Geometry (TO-220)
Another plausible use for the A68064, as stated by some suppliers, is as a in the TO-220 package. This could imply a standard rectifier diode or a high-speed switching diode. A common application listed is that of an AC and DC drive component, which aligns with power conversion duties.
The A68064 is used in a wide range of applications, including:
The device uses a standard optimized for mechanical robustness and ease of heatsinking.
Always treat datasheets as the official reference for component specifications and design compliance. When in doubt, trust the manufacturer’s documentation above all else.
The A68064, also known as the MC68064, is a 32-bit microprocessor developed by Motorola (now NXP Semiconductors). Released in the late 1980s, this processor was designed to provide a balance of performance, power efficiency, and cost-effectiveness for a wide range of applications. In this blog post, we'll dive into the A68064 datasheet, exploring its key features, specifications, and use cases.
Once you have identified which A68064 you need, you must locate the official document.
While the is a robust component, similar high-power MOSFETs or Darlington transistor arrays can sometimes serve as alternatives depending on the specific application demands. Similar components often found in similar roles include devices from the ULN2003A series for lower-power logic applications or other N-channel TO-220 MOSFETs for higher-power requirements. 6. Summary for Designers
, which is designed for efficient heat dissipation in power-switching and industrial automation applications. Key Specifications & Applications Component Type: High-performance N-channel MOSFET or Sink/Latch Driver IC. Package Type: (standard through-hole power package). Primary Uses:
The A68064 is a high-performance mixed-signal microcontroller (MCU) family intended for embedded applications requiring low power, flexible I/O, and integrated analog peripherals. This article summarizes the device’s main features, typical electrical characteristics, functional blocks, and common application scenarios to help engineers evaluate suitability and accelerate design integration.
| | Min | Typ | Max | Unit | |---|---|---|---|---| | Power Supply Voltage (VBB) | 9 | — | 16 | V | | Output Current (Continuous) | — | — | 205 | mA | | Output Current (Sustained) | — | — | 410 | mA | | Peak Output Current | — | — | 500 | mA | | On Resistance (Output Drivers) | — | 0.85 | 1.6 | Ω | | Operating Temperature Range | -40 | — | +150 | °C |
| | Specification | |---|---| | Voltage Rating | 600V - 800V | | Current Rating (I_T(RMS)) | 8A (Typical) | | Package Type | TO-220 | | Temperature Range | -40°C to 85°C | | Key Application | Power Switching / AC Motor Control |
The TO-220 package configuration provides a balance between physical compact sizing and structural mechanical robustness. The exposed metal tab at the rear is mechanically tied to the internal drain/collector node, allowing developers to couple the device directly to external aluminum heat sinks.
TO-220 Package +---------------+ | [ Tab ] | <-- Thermal Heat Sink Connection | +---------+ | | | | | | +---------+ | | A68064 | +---------------+ | | | | | | 1 2 3 Gate Drain Source Pin Number Description Circuit Placement Gate (G) Controls the conduction state Tied to MCU/Driver PWM output 2 Drain (D) Connects to the high-voltage load Tied to low-side of load 3 Source (S) Connects to system reference ground Tied directly to system ground Electrical Characteristics and Performance Analysis
Faça login para ver o conteúdo
+---------------+ | TECCOR | | A68064 | +---------------+ | | | | <-- Exposed Metal Tab (Connected to Pin 2 / Load Side) | | | 1 2 3 | | | G D S (Control / Main Terminals)
): 2 Watts (base rating without external thermal management) -40°C to +105°C Pin Configuration and Package Geometry (TO-220)
Another plausible use for the A68064, as stated by some suppliers, is as a in the TO-220 package. This could imply a standard rectifier diode or a high-speed switching diode. A common application listed is that of an AC and DC drive component, which aligns with power conversion duties.
The A68064 is used in a wide range of applications, including: a68064 datasheet
The device uses a standard optimized for mechanical robustness and ease of heatsinking.
Always treat datasheets as the official reference for component specifications and design compliance. When in doubt, trust the manufacturer’s documentation above all else.
The A68064, also known as the MC68064, is a 32-bit microprocessor developed by Motorola (now NXP Semiconductors). Released in the late 1980s, this processor was designed to provide a balance of performance, power efficiency, and cost-effectiveness for a wide range of applications. In this blog post, we'll dive into the A68064 datasheet, exploring its key features, specifications, and use cases. +---------------+ | TECCOR | | A68064 | +---------------+
Once you have identified which A68064 you need, you must locate the official document.
While the is a robust component, similar high-power MOSFETs or Darlington transistor arrays can sometimes serve as alternatives depending on the specific application demands. Similar components often found in similar roles include devices from the ULN2003A series for lower-power logic applications or other N-channel TO-220 MOSFETs for higher-power requirements. 6. Summary for Designers
, which is designed for efficient heat dissipation in power-switching and industrial automation applications. Key Specifications & Applications Component Type: High-performance N-channel MOSFET or Sink/Latch Driver IC. Package Type: (standard through-hole power package). Primary Uses: The A68064 is used in a wide range
The A68064 is a high-performance mixed-signal microcontroller (MCU) family intended for embedded applications requiring low power, flexible I/O, and integrated analog peripherals. This article summarizes the device’s main features, typical electrical characteristics, functional blocks, and common application scenarios to help engineers evaluate suitability and accelerate design integration.
| | Min | Typ | Max | Unit | |---|---|---|---|---| | Power Supply Voltage (VBB) | 9 | — | 16 | V | | Output Current (Continuous) | — | — | 205 | mA | | Output Current (Sustained) | — | — | 410 | mA | | Peak Output Current | — | — | 500 | mA | | On Resistance (Output Drivers) | — | 0.85 | 1.6 | Ω | | Operating Temperature Range | -40 | — | +150 | °C |
| | Specification | |---|---| | Voltage Rating | 600V - 800V | | Current Rating (I_T(RMS)) | 8A (Typical) | | Package Type | TO-220 | | Temperature Range | -40°C to 85°C | | Key Application | Power Switching / AC Motor Control |
The TO-220 package configuration provides a balance between physical compact sizing and structural mechanical robustness. The exposed metal tab at the rear is mechanically tied to the internal drain/collector node, allowing developers to couple the device directly to external aluminum heat sinks.
TO-220 Package +---------------+ | [ Tab ] | <-- Thermal Heat Sink Connection | +---------+ | | | | | | +---------+ | | A68064 | +---------------+ | | | | | | 1 2 3 Gate Drain Source Pin Number Description Circuit Placement Gate (G) Controls the conduction state Tied to MCU/Driver PWM output 2 Drain (D) Connects to the high-voltage load Tied to low-side of load 3 Source (S) Connects to system reference ground Tied directly to system ground Electrical Characteristics and Performance Analysis