Point-n-measure Digital Tape W5746 User Manual ((top)) -

Toggles between Imperial (feet/inches) and Metric (meters) units.

The Point-N-Measure Digital Tape W5746 revolutionizes how DIY enthusiasts and construction professionals capture dimensions. By combining traditional physical tape measuring with advanced ultrasonic distance estimation and laser targeting, this tool delivers fast, accurate calculations.

Press the button to toggle between these two modes. An icon on the screen indicates your selection. 5. Advanced Calculation Modes

support@pointnmeasure.com 1-800-555-TAPE (8273) www.pointnmeasure.com/w5746

The ultrasonic cone widens over distance. Ensure there are no plants, furniture, or pillars between you and the wall. Point-N-Measure Digital Tape W5746 User Manual

Compact, pocket-sized design weighing approximately 4 ounces. How to Use (Standard Operation) Based on similar models and seller descriptions:

Understanding the capabilities and limitations of your tool is essential for best results. While exact specifications can vary by production run, the following are typical for a digital tape measure of this class:

The opening at the front of the unit from which the measuring beam or signal is emitted.

Before using your W5746, please read and observe the following safety precautions to ensure safe and proper use: Press the button to toggle between these two modes

| Parameter | Value | |-----------|-------| | Laser range | 0.5 – 130 ft (0.2 – 40 m) | | Laser accuracy | ± 1/16 in (± 1.5 mm) | | Tape range | 0 – 16 ft (0 – 5 m) | | Tape accuracy | Class II (± 1.2 mm over 5 m) | | Laser class | Class 2, 635 nm, <1 mW | | Battery | 3.7 V Li-ion, 400 mAh | | Auto shut-off | 180 sec (laser) / 300 sec (idle) | | Operating temp | 32°F – 104°F (0°C – 40°C) | | Weight | 8.5 oz (240 g) |

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

The battery power is critically low. Replace both AAA batteries immediately to prevent inaccurate readings.

Use this mode for measuring distances without unspooling the tape. Advanced Calculation Modes support@pointnmeasure

Clear the path to the target; hold the device perfectly flat and steady. Target is outside the operational range

Allows you to choose between measuring from the front or the base of the device.

If the unit is not used for a long time, remove the battery to prevent leakage.