Most Multistar Digital Video Recorders (DVRs) leave the factory with a standard, pre-set security code. While this default password makes initial setup easy, leaving it unchanged exposes your entire security network to unauthorized access and cyber threats. Common Multistar DVR Default Passwords
Once you're back in, remember to set a new password immediately to secure your footage. Uniview Cameras & NVR Default Username and Password
To log in, enter into the username field, leave the password field completely empty, and press enter. If that does not work, input 123456 as the password. Why Knowing the Default is Critical
If your DVR is connected to the internet for remote mobile viewing, change the default HTTP port (usually 80) and Media port (usually 34567 or 37777) to custom random numbers to prevent automated botnet scanning.
Because these units are not as mainstream as Lorex or Swann, finding official documentation can be difficult. Consequently, the community relies heavily on known factory defaults. multistar dvr default password work
You gain full access to configuration menus, recording schedules, and network settings.
Try these combinations for the user, which are frequent across generic DVR brands:
If the standard options do not work, try these common manufacturer defaults: admin (most common) or root . Passwords: 123456 admin 1111 000000 1234 How to Reset if Default Fails
The story usually begins in one of two ways: either a user has purchased a second-hand security system, or they are trying to recover a system after a power outage or employee turnover. They plug in the monitor, boot up the recorder, and are immediately greeted by a login screen asking for a password. They never set one, or they forgot it years ago. Most Multistar Digital Video Recorders (DVRs) leave the
Restart the DVR. The date should reset (often to 2000.01.01), which may clear the password or allow you to use a "Super Password" based on the system date.
Right-click the mouse on the live view screen and select Main Menu or System Setup .
The existence of a default password is a relic of the "Plug and Play" era—a time when manufacturers prioritized ease of setup over security hygiene. The logic was simple: ship the device with an open door so the user can walk in immediately.
If you have never changed the password, try these common combinations: admin / Password: 123456 Username: admin / Password: 12345 Username: admin / Password: 000000 Username: admin / Password: (blank/empty) Username: admin / Password: admin Uniview Cameras & NVR Default Username and Password
A factory reset can restore the DVR to its original state, but it's a drastic step. This is a common misconception. Resetting will revert network, recording, and display settings, but user accounts and passwords often remain unchanged for security reasons.
Remove the small circular battery (CR2032) from the DVR's motherboard for at least 10 minutes. This can sometimes reset the system clock to a factory date (e.g., 2000-01-01), which may allow you to use a "Super Password" generated for that specific date.
The system should reboot, clearing all custom settings and passwords. 4. Software and QR Code Recovery