Zte F689 Bridge Mode Exclusive ✮

You must complete this setup using a hardwired computer connected directly to one of the LAN ports of the ZTE F689. Do not attempt this over Wi-Fi. Step-by-Step Configuration Guide

If your ISP uses PPPoE authentication, locate your specific username and password from your contract.

The ISP MAC address cache is locked onto your old PC setup instead of the new router. zte f689 bridge mode exclusive

Requirements

What are you connecting to the ZTE F689? You must complete this setup using a hardwired

In , the F689 stops acting as a router and simply converts the fiber GPON signal to Ethernet (or VLAN-tagged Ethernet) — functioning as a pure Layer 2 bridge. Key changes:

Do not attempt this over Wi-Fi; you will get disconnected. The ISP MAC address cache is locked onto

Once inside the administrator panel, follow these exact configuration steps: Step 3.1: Navigate to WAN Settings Click on or Internet from the top menu. Select WAN or WAN Connection from the left-hand sidebar. Step 3.2: Modify the Existing Connection

Open a web browser and type 192.168.1.1 (or 192.168.0.1 ) into the address bar. Enter your administrator username and password. Step 3: Delete or Modify the Existing WAN Connection Navigate to the top menu and click on . Select WAN from the left-hand sidebar.