: Connects to the system's power source or battery to power the board itself.
The is a high-precision battery charge and discharge control module designed to protect battery systems from overcharging and over-discharging. It functions as an integrated voltmeter and programmable relay, making it a popular choice for DIY solar setups and custom power management projects. Core Technical Specifications
Complete Guide to the XH-M608 Battery Charge Control Module The is a versatile, programmable battery charge and discharge controller module . It functions as an intelligent voltage-controlled switch, allowing you to automate battery charging or manage load disconnection based on real-time voltage levels. Technical Specifications Input Voltage: DC 6V–60V (Max 80V) Display Precision: 0.1V Control Accuracy: 0.1V Xh-m608 Manual
DC 6V – 60V (Commonly used for 12V and 24V batteries) Control Accuracy: 0.1V Output Type: Direct Output / Relay Switch Output Voltage Error: ±0.1V
🚨 While the relay can handle significant current, always check your specific model's rating (usually 10A or 20A). For high-power loads, use the XH-M608 to trigger a larger external contactor or heavy-duty relay. If you'd like to dive deeper, let me know: : Connects to the system's power source or
: Isolated connection points acting as an inline smart switch. They are labeled for Normally Open (NO), Common (COM), and Normally Closed (NC).
: The relay is off by default and will turn on when the voltage drops below the P1 lower limit. It will remain on until the voltage rises above the P2 upper limit, at which point it turns off . This creates a "charge me" signal. Core Technical Specifications Complete Guide to the XH-M608
The initial setup process is straightforward. Follow these steps:
Displays the current voltage at the input terminals without triggering the relay. P (Voltage Protection):