Mt3367 Android Scatter.txt !new! Jun 2026

A scatter file is a plain text configuration file used by MediaTek (MTK) development and flashing utilities. It acts as a precise raw map of the device’s internal eMMC, UFS, or NAND flash memory storage.

A Scatter file is a text file used in the Android firmware flashing process. It contains information about the layout of the firmware components, such as the bootloader, kernel, and system image, on a specific device. The Scatter file helps the flashing tool, like SP Flash Tool, to correctly place the firmware components in the device's memory.

Defines the boundaries of essential partitions like boot , system , recovery , and userdata .

: Classification parameters such as BOOTLOADERS , UPDATE , PROTECTED , or RESERVED . Core Partitions Mapped in the MT3367 Layout

partition_name: LOGO file_name: logo.bin is_download: true type: PRIMARY_ROM linear_start_addr: 0x00680000 physical_start_addr: 0x00680000 partition_size: 0x00100000 region: EMMC_USER storage_space: EMMC mt3367 android scatter.txt

- partition_index: SYS12 partition_name: boot file_name: boot.img is_download: true type: NORMAL_ROM linear_start_addr: 0x000000000D000000 physical_start_addr: 0x000000000D000000 partition_size: 0x0000000001000000 region: REGION_USER Use code with caution. Key Parameter Definitions:

Click on the Choose button next to the "Scatter-loading File" field. Navigate to your firmware folder and select MT3367_Android_scatter.txt .

Android devices do not store everything in one giant folder. Instead, the storage is divided into distinct, isolated blocks called (such as boot , system , recovery , and userdata ). The scatter file tells the flashing software exactly where each partition begins, how large it is, and which image file (e.g., system.img ) belongs to which block. Without a scatter file, flashing tools cannot communicate with the device's bootloader or target memory boundaries. Key Technical Specifications of MT3367 Storage Architecture

You are attempting to load an MT3367 scatter file onto a device running a different MediaTek processor (like an MT6739 or MT6580). Double-check your hardware specifications. A scatter file is a plain text configuration

Flashing firmware typically erases all personal data. Charge Your Device: Maintain at least 50% battery capacity. Flashing Procedure: Step 1: Launch SP Flash Tool

Click the green arrow button at the top of the interface. SP Flash Tool is now waiting for the device to connect. Turn off your MT3367 device completely.

The exact memory address where the partition begins.

Wipes and completely overwrites the partition structure. Use this if you are upgrading to a radically different Android version. It contains information about the layout of the

Avoid "Format All + Download" unless your device is completely hard-bricked, as this can permanently erase your unique IMEI number and NVRAM calibration data.

Professional repair technicians use hardware boxes to read the hardware configuration info block directly over a USB COM connection and export it instantly as a fully compatible text scatter file. Method 2: Using MTK Flash Tool Readback Feature

The exact byte capacity allocated to that partition.

Once loaded, SP Flash Tool will parse the file and automatically populate the checklist below with partition names, location addresses, and target file paths. Ensure the checkboxes next to the partitions you wish to flash are checked. Select the Flashing Mode:

Indicates whether the device uses eMMC, UFS, or NAND storage. 2. Partition Blocks

- general: MTK_PLATFORM_CFG info: - config_version: V1.1.2 platform: MT3367 project: your_device_project_name storage: EMMC boot_channel: MSDC_0 Use code with caution.