Canon Service Resetter Tool ((top)) Jun 2026

Note: The printer must be connected to a Windows PC via a . Service tools do not work over Wi-Fi or network connections.

The most common version, (and earlier versions like v5103 or v4905), supports a wide range of PIXMA and MAXIFY printers. Popular supported series include:

After this sequence, the power light will flash or turn green, indicating that the printer is in Service Mode.

Using a Canon Service Resetter Tool carries risks if not done carefully. Common Troubleshooting Issues canon service resetter tool

If you choose to proceed with a DIY reset, do your research first, verify the exact tool version required for your printer model, download only from trusted sources, and be prepared for the possibility of failure. In the words of one technician on a printer forum: “The best thing we can do is to junk these Epson and Canon inkjet printers and don’t buy anymore until Canon will incorporate these tools and make it readily available”.

The Canon Service Resetter Tool is not universal. It works on specific chipsets. Generally, it supports:

A Canon Service Resetter Tool is an incredibly valuable asset that can save your printer from the landfill. By carefully entering Service Mode and clearing the internal memory chip, you can bypass frustrating error codes like 5B00 and continue printing immediately. Just remember to handle the physical waste ink pads eventually so your printer stays clean inside and out! Note: The printer must be connected to a Windows PC via a

The selected function is not supported by your model.

The series is one of the oldest types of Canon reset utilities. These tools are designed for Canon’s early Pixma iP series printers, such as the iP1000, iP1100, iP1180, iP1200, iP1300, iP1500, iP1600, iP1700, iP1800, iP1880, iP2200, iP2500, and iP2580, as well as certain Japanese Pixus models.

If your printer is still under warranty, resetting the counter (or even entering Service Mode) is logged in the EEPROM. Canon techs can see that you cleared the counter. They will refuse future repairs. Popular supported series include: After this sequence, the

Turn your printer off, wait 10 seconds, and turn it back on. Your printer is now reset! Important Warnings and Best Practices

Your Canon printer suddenly stops working. The lights are flashing, and an error code like or 1700 pops up on your screen. Your computer tells you that the "ink absorber is almost full."

Click the Print button under the "Counter Value" or "EEPROM" section to print a diagnostic sheet confirming the counter reads D=000.0 (0% full).

Once the printer is in Service Mode, plug the USB cable back into the computer.