Ericsson Mini Link Cli Commands Review

Ericsson MINI-LINK is a widely deployed microwave transmission solution used in mobile backhaul and private networks. While the graphical user interface (Element Manager) is useful for basic configuration, network engineers rely on the Command Line Interface (CLI) for rapid troubleshooting, automated scripting, and advanced configurations.

admin> odu info admin> odu lldp neighbors admin> odu reset

For years, the CLI has been the tool of choice for professional network management. The MINI-LINK CLI is no exception; it offers a set of commands for on-site installation, configuration management, fault management, performance management, and software upgrades. For advanced IP router configuration and troubleshooting, it provides a style familiar to Cisco professionals, adding a layer of comfort for many engineers. ericsson mini link cli commands

Accessing the CLI usually occurs via Telnet, SSH, or a serial console connection, often utilizing the to initiate communication. Connection and Initial Setup

: Displays subrack details for models like TN 6P or 20P. The MINI-LINK CLI is no exception; it offers

| Command | Mode | Description | |---------|------|-------------| | alarm threshold rsl | Global | Set RX level alarm limits | | bandwidth | Radio if | Channel width in MHz | | clock source | Controller | SDH timing source | | copy | Privileged | File operations | | debug | Privileged | Real-time debugging | | enable | User | Enter privileged mode | | frequency | Radio if | TX/RX center frequency | | interface | Global | Enter interface config | | modulation | Radio if | Adaptive or fixed | | ping | Privileged | ICMP echo test | | show system | Any | System status | | snmp-server | Global | SNMP configuration | | speed | Ethernet if | 10/100/1000 setting | | test radio bert | Privileged | Bit error test | | vlan | Global | VLAN creation |

set radio-link amr-mode — Enables or disables Adaptive Modulation and Coding (AMR). Ethernet and VLAN Configuration Connection and Initial Setup : Displays subrack details

You can access the MINI-LINK CLI via a serial connection (Local Craft Terminal port) or remotely over the network using Secure Shell (SSH). Default Credentials administrator (or admin ) Password: administrator (or configured network password)

interface ethernet 1 description "To Core Router" speed 1000 duplex full auto-negotiation enable no shutdown exit

Before making changes, verify the current hardware state, software version, and system uptime.

| Command | Description | |---------|-------------| | show log | System log (syslog) | | show hardware internal | Detailed hardware registers (factory support only) | | loopback interface eth0 internal | Internal loopback on Ethernet port | | test led | Flash LEDs for identification | | debug radio | Radio-specific debugging (limited access) | | show environment | Power, temperature, and fan summary |