when stored in a cool, dry place below 25°C in its original, unopened containers. Tools and equipment can be cleaned with clean water
Prevent the material from entering drains, surface water, waterways, or soil systems.
Nitocote PE135 is an eco-friendly, single-component protective coating and curing compound based on hydrophobic polyester resin . It is designed to provide corrosion, chemical, and abrasion resistance for concrete substrates.
Nitocote PE135 waste should be managed in compliance with local, state, and federal environmental regulations. nitocote pe135 msds
May cause mild skin or eye irritation upon direct contact. Prolonged inhalation of mists or vapors in highly confined, unventilated areas may cause minor respiratory discomfort. 3. Composition / Information on Ingredients The product primarily consists of:
Wash affected areas thoroughly with soap and water. Do not use harsh solvents or thinners to remove the product from skin. Remove contaminated clothing.
Do not induce vomiting unless directed by medical personnel. Rinse mouth out with water and seek prompt medical attention. 5. Fire-Fighting Measures when stored in a cool, dry place below
Wear standard industrial overalls and safety boots to minimize skin contact. 9. Physical and Chemical Properties State: Liquid / Paste Color: Gray Odor: Typical low-odor bitumen scent Boiling Point: ~100°C (Water content) Density: ~1.15 to 1.22 g/cm³ at 25°C
The Nitocote PE135, like many industrial chemicals, requires careful handling and use of appropriate safety measures to minimize risks. Users must read and follow the MSDS, understand the composition, hazards, and first aid measures, and implement recommended handling and storage practices.
Generally classified as non-hazardous under normal conditions of use, or mildly irritating. It is designed to provide corrosion, chemical, and
May cause mild, reversible irritation or drying of the skin.
Chemical splash goggles or safety glasses with side shields.
In case of accidental exposure during handling or application, execute the following first-aid protocols immediately:
Miscible/dispersible when wet; completely insoluble after curing
