Place a clean firing tray into the chamber with a designated silver wire strip.
Over time, the internal thermocouple can drift. Perform a silver wire calibration test every six months:
Never operate the furnace without the vacuum pump connected and verified. 3. Operating the Programat P95 Ivoclar Programat P95 Manual
The Ivoclar Programat P95 is a versatile and user-friendly furnace designed for dental laboratories and clinics. Its advanced technology and intuitive interface make it an ideal choice for processing a wide range of dental materials. The furnace features:
Run the internal automated calibration program or manually set a program to climb slowly to (the exact melting point of pure silver). Place a clean firing tray into the chamber
For more information on the Ivoclar Programat P95 and its manual, visit the following resources:
Allow the furnace to reach its programmed standby temperature ( B ). The display will indicate when the unit is stable. The furnace features: Run the internal automated calibration
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
Periodically run a cleaning program (firing at high heat without vacuum) to remove contaminants.
Follow these steps for a standard dental ceramic firing cycle: Pre-Heating
Pauses or cancels an active firing cycle.