Centurion Bp-12 Problems -
Q: How do I troubleshoot extraction issues with the Centurion BP-12? A: To troubleshoot extraction issues, clean the chamber thoroughly, check the ammunition for any signs of damage or incorrect loading, and inspect the extractor for wear or damage.
A common factory defect involves sharp threads on the gas system that can shred the internal rubber O-rings.
The gas system relies on internal seals that are prone to premature damage The Problem
The most widespread issue with the BP-12 is its inability to cycle lightweight or low-velocity shells smoothly. Centurion BP-12 shotgun problems right out of the box centurion bp-12 problems
Make sure that the hop-up system is properly adjusted according to the manufacturer's instructions.
If issues persist, it is recommended to contact the manufacturer's customer service department for warranty support.
Some aftermarket magazines manufactured for ProMag or MKA 1919 shotguns offer smoother follower travel than factory Centurion mags. 2. Failure to Extract (FTE) and Cycle Low-Brass Ammo Q: How do I troubleshoot extraction issues with
The Centurion BP-12, manufactured by Armscor International, is a budget-friendly, pump-action shotgun chambered in 12-gauge. Its affordability and features have made it a popular choice among firearms enthusiasts. However, some users have reported issues with the firearm, which we'll explore in this review.
This is the predominant issue. The BP-12 often struggles to strip the next shell from the magazine and properly chamber it. This is frequently attributed to:
Some users report that large drum magazines can be unreliable due to the angling of the magazine in the bullpup configuration. 4. Abnormal Wear and Quality Control The gas system relies on internal seals that
| Problem | Likely Cause | Recommended Solution | | :--- | :--- | :--- | | | Excessive factory grease / cosmoline | Thoroughly disassemble, clean, and lubricate the gun. | | Failure to Eject | Low-power ammunition | Switch to high-velocity loads (1350+ fps). | | Failure to Feed | Weak ammunition or tight mag spring | Use high-power ammo; leave magazines fully loaded for a week. | | Inconsistent Cycling | Gun not broken in yet | Continue shooting high-power loads; the action should smooth out. | | No Customer Support | Manufacturer issue | Be aware that support for this price point is often limited. |
If you are looking for a reliable home defense or competition shotgun out of the box, look elsewhere (e.g., Mossberg 930, Beretta 1301). However, if you enjoy tinkering, don’t mind a break-in period, and can accept occasional malfunctions, the BP-12 can be a fun range toy. The key is ammunition selection – stick to 1300+ FPS 2¾" shells, keep the gun wet with lubricant, and expect to replace magazines as they fail.
One of the most critical steps to making the gun run is a detailed initial cleaning. Many users report that the gun arrives packed in a heavy "cosmoline" or shipping grease that can foul the action and cause malfunctions if not removed. If the "buffering spring" is stiff, some have recommended storing it cocked for a week to help break it in.
Use high-velocity shells (at least 1,250–1,300 FPS) with a heavy shot weight (e.g., 1 1/8 oz or higher) to ensure enough gas pressure is generated to cycle the action.
If you are looking for a reliable, out-of-the-box, heavy-duty tactical shotgun, the BP-12 may require more effort than it is worth. However, for a fun, budget-friendly range toy or home defense option, it can perform well once broken in. If you are interested, I can help you find: Reputable 1919-pattern magazines Tips for cleaning and lubricating the gas system Where to buy the Centurion BP-12
