: Download the LibUSB-Win32 installer. Launch the "Filter Wizard," select Install a device filter , plug your device into the PC while holding the boot keys, and quickly select the MediaTek/Preloader device to install the filter.
The handshaking error occurs when the MTK Bypass Tool fails to establish a secure, synchronized connection with the device's Boot ROM (BROM) mode. When you connect your powered-off device while holding the volume keys, the tool sends a specific sequence of data packets to exploit the chipset's boot vulnerabilities. If the timing, drivers, or hardware interface fail to respond precisely as expected, the tool times out and outputs a handshake failure message. Primary Causes of the Error mtk bypass tool handshaking error fix
while connected to reset the device and try the handshake again immediately. Software & Hardware Compatibility Security Patches : Download the LibUSB-Win32 installer
MediaTek flashing tools often fail on USB 3.0 ports due to controller incompatibilities. Always use a USB 2.0 port (usually black or grey). When you connect your powered-off device while holding
What appears right after the handshake fails? Share public link
At this point, your tool is "bypassing" security. Keep the tool window open. Now open or your preferred flashing software. The device will remain in a vulnerable state for 30-60 seconds. Flash your firmware or perform FRP reset immediately.
Have a unique handshake fix? Share it in the comments below to help the MTK community.
For announcements of prebuilt binaries for Linux, Mac OS X, and Windows, head over to the E-Maculation Forums.
Other prepackaged versions of Basilisk II that I am aware of:
Really old versions for legacy systems:
To download the current version of the repository via Git:
$ git clone https://github.com/cebix/macemu.git
After downloading and setting up the repository you can, for example, try to compile the Unix version of Basilisk II:
$ cd macemu/BasiliskII/src/Unix $ ./autogen.sh $ make