Wait about 10 seconds, then turn the printer back ON. The blinking error lights should be gone, and the printer should be ready to use again.
Check the boxes for "Main Pad Counter" and "Platen pad counter" , then click "Check" to verify that they are at 100%.
Resetting the digital counter does not physically clean the ink. Users must eventually replace or wash the physical felt pads to avoid actual ink spills. Risk of Misuse:
While the software features dozens of advanced calibration tools, regular users primarily seek it out for one specific maintenance task: resetting the Waste Ink Pad Counter back to zero percent. Step-by-Step Guide to Resetting the Epson L3210 adjustment program epson l3210 exclusive
Once you have successfully reset your printer, proactive maintenance can help you avoid future problems.
The software will display a message: "Please turn off the printer."
The program then prompted John to follow a series of steps, including: Wait about 10 seconds, then turn the printer back ON
(often referred to as the "Resetter") is an essential utility designed to maintain the operational longevity of the Epson EcoTank L3210 printer. While printers are indispensable tools in modern offices and homes, they are programmed with internal safeguards—specifically waste ink counters—that eventually halt operation. The adjustment program serves as the primary solution to bypass these mechanical "roadblocks" and restore the device to full functionality.
Unscrew the single screw on the back-bottom corner of the L3210, slide out the plastic waste ink tank, and replace the internal felt pads with cheap replacements available online.
A message will prompt you to turn off the printer. Turn it off, then click "OK" , and then turn the printer back on. Resetting the digital counter does not physically clean
The printer stops, and all lights flash.
A more powerful cleaning cycle than the one found in standard settings. Step-by-Step: How to Use the Resetter To use the adjustment program safely, follow these steps:
Every printer, especially when cleaning its printhead or printing borderless photos, generates a small amount of waste ink. This ink is channeled into a physical "waste ink pad" — a felt-like sponge designed to absorb it. To prevent this pad from becoming completely saturated and leaking ink inside your device, Epson built a into the printer's memory.